Notification

Icon
Error

Ubiquiti Unifi OID and MIB files

Posted: Monday, September 24, 2018 8:14:31 PM(UTC)
crashff

crashff

Member Original PosterPosts: 69
0
Like
I did a full SNMP walk against my UAP-AC-PRO's and exported them. I did make some notations in the SNMPWALK text file for what I could identify (before I found the MIB files)

The MIB files are direct from Ubiquiti, but they were last updated in 2014, so they are missing some information that is in the SNMPWalk data. Both are required for MIB viewing.

I would like to note that Lansweeper identifies a very early OID number in the tree that is for FreeBSD, and is incorrect, resulting in a lot of missed information (the incorrect OID value is UBNT's fault for not correcting years ago.

Scanned number .1.3.6.1.2.1.1.2.0 = OID return value: 1.3.6.1.4.1.8072.3.2.10
Handles attachments
UBNT_snmpwalk.txt (52kb) downloaded 179 time(s).
UBNT-MIB (4kb) downloaded 105 time(s).
UBNT-UniFi-MIB (14kb) downloaded 101 time(s).

Active Discussions

Lansweeper Windows CE - Scanning
by  maupaiva   Go to last post Go to first unread
Last post: Yesterday at 8:08:13 PM(UTC)
Lansweeper Update DNS record
by  Lewis_Spokane  
Go to last post Go to first unread
Last post: Yesterday at 4:09:26 PM(UTC)
Lansweeper Trigger deploy when seen
by  bbazian   Go to last post Go to first unread
Last post: Yesterday at 10:31:44 AM(UTC)
Lansweeper More customizable interface
by  Christophe Rahier  
Go to last post Go to first unread
Last post: Yesterday at 9:09:33 AM(UTC)
Lansweeper TeamViewer Custom Action
by  CyberCitizen   Go to last post Go to first unread
Last post: Yesterday at 1:39:48 AM(UTC)
Lansweeper Deployment Java
by  mlachance  
Go to last post Go to first unread
Last post: 5/23/2019 4:46:38 PM(UTC)
Lansweeper Custom OID Scanning Range
by  tcooper   Go to last post Go to first unread
Last post: 5/23/2019 4:32:59 PM(UTC)
Lansweeper Approved Software
by  AZHockeyNut  
Go to last post Go to first unread
Last post: 5/23/2019 4:07:58 PM(UTC)