Hi all,Does someone have fortiswitches and are able to scan them trough snmp (pull mac adress to link assets to port)It seem's like the snmp query must specify the vlan to pull such info, but i'm not sure...Regards,
I all, I have the following reports that show all my equipment in a IP range. I would like to see childs of these assets on a second line.EX:COM-001 (that have the Monitor-001 linked to it)Mon-001...Select Top 1000000 tblAssets.AssetID, tblAssets.As...
Hi all,My boss asked if it was possible to have a report that will do the following:List of printer with serial number by ip location sorted by location with a total by location and a total off all printerEXIPLOC GSOPrinter 1 --- serial number --- LO...
Hi,I did used the "Lansweeper device tester" to verify the SNMP connection.The connection wasn't working so I did the needed change in the fortiswitch a while ago.The switch is visible in Lansweeper, i can see witch port is down or up.But I still doe...
Hi all if you are interested my colleague found how to do that (the following code is for computer but i've done it for printers too) !We use the asset name since we have a pattern.Select Top 1000000 Totaux, Nombres, AssetID, AssetName, IPAddress...
I was also wondering if it was possible to add groups in the scanning exclusion. As far as i know for the moment it is not possible. But you can use the IP Address Exclusion and enter multiple IP Adresses.Possible input values are IP ranges, IP addre...