Notification

Icon
Error

Pro Tips #6: IP Address Management

Posted: Friday, September 24, 2021 2:50:09 PM(UTC)
Esben.D

Esben.D

Member Administration Original PosterPosts: 2,083
0
Like
The latest Pro Tips blog post covers methods of using Lansweeper for IP address management. While there isn't an IPAM module in Lansweeper, with some advanced reporting you can get some interesting data.

If you're looking for more ways to tackle IPAM with Lansweeper, this topic also has some interesting ideas: https://www.lansweeper.c...abilities.aspx#post64652
CR
#1CR Member Posts: 1  
posted: 9/28/2021 2:01:25 PM(UTC)
We need help implementing a workaround to prevent MACs from merging when sharing a USB-C Ethernet adapter. We Often use the docking station to configure/Image a MAC before provisioning to the user. We are using the LSAgent and of course when the LS uses the USBC ethernet adapter Physical address for the UNIQUE ID which causes conflict with a second MAC if using the same ethernet adapter. Is there anything that can be done about this without having to avoid sharing ethernet adapters?

Thanks
Handles attachments
LS asset Merge message.pdf (195kb) downloaded 3 time(s).
Esben.D
#2Esben.D Member Administration Original PosterPosts: 2,083  
posted: 10/6/2021 9:35:50 AM(UTC)
Originally Posted by: CR Go to Quoted Post
We need help implementing a workaround to prevent MACs from merging when sharing a USB-C Ethernet adapter. We Often use the docking station to configure/Image a MAC before provisioning to the user. We are using the LSAgent and of course when the LS uses the USBC ethernet adapter Physical address for the UNIQUE ID which causes conflict with a second MAC if using the same ethernet adapter. Is there anything that can be done about this without having to avoid sharing ethernet adapters?
Thanks


Not entirely related to this topic Think

There are ways to blacklist MAC addresses that cause a merge, however this is usually only used for Network devices, not Windows/Mac/Linux. Maybe contact support and explain your case with some screenshots so they can provide you with the best guidance.
Quick Reply Show Quick Reply

Active Discussions

Lansweeper Linux Agent - login user
by  Dinusha Chandrasinghe   Go to last post Go to first unread
Last post: Today at 11:03:07 AM(UTC)
Lansweeper device with multiple NICs
by  mzipperer  
Go to last post Go to first unread
Last post: Yesterday at 7:42:57 PM(UTC)
Lansweeper Internal Note
by  mdavis2503   Go to last post Go to first unread
Last post: Yesterday at 6:00:07 PM(UTC)
Lansweeper Problem with deploy software
by  Max90  
Go to last post Go to first unread
Last post: Yesterday at 12:09:40 PM(UTC)
Lansweeper Can lsagent be protected from deletion
by  RKCar   Go to last post Go to first unread
Last post: 11/29/2021 8:56:09 PM(UTC)
Lansweeper HTTPS not secure
by  Larry Rhea  
Go to last post Go to first unread
Last post: 11/29/2021 7:50:59 PM(UTC)
Lansweeper Warning about Built-in Admin
by  Larry Rhea   Go to last post Go to first unread
Last post: 11/29/2021 7:45:45 PM(UTC)