Notification

Icon
Error

Static IP Address - Static IP Address for All Devies

Posted: Friday, September 20, 2019 2:08:35 AM(UTC)
rshuster

rshuster

Member Original PosterPosts: 1
1
Like
I know there is a report that will give me Static IP address for computers, but how would I get static IP's for all devices on the network such as wireless AP's, Printers, Hand-held scanners, etc?
Esben.D
#1Esben.D Member Administration Posts: 1,982  
posted: 9/20/2019 12:26:40 PM(UTC)
Static IP configuration is not scanned for network devices. If all your network device already have a static IP address, than you can just create a report with all the network devices and their IP address.

If you are looking to determine which device are using a static IP address and which ones are dynamic, unfortunately it won't be possible. This information is only scanned from Windows assets.
cycleheat
#2cycleheat Member Posts: 30  
posted: 9/20/2019 4:07:16 PM(UTC)
One method would be to check your DHCP server's active leases and compare that to an IP address report from Lansweeper.

Or move your DHCP pool and see which machines change to the new range.

Active Discussions

Lansweeper local admin users of a specific device
by  kdunnett   Go to last post Go to first unread
Last post: 5/25/2020 9:30:26 PM(UTC)
Lansweeper How to get total disk usage of all VM assets
by  Erik.T  
Go to last post Go to first unread
Last post: 5/25/2020 4:49:58 PM(UTC)
Lansweeper Windows Server 2016 & Patch Tuesday May 2020
by  Hendrik.VE   Go to last post Go to first unread
Last post: 5/22/2020 8:20:05 PM(UTC)
Lansweeper Users mapped "shared" printers
by  Andy.S  
Go to last post Go to first unread
Last post: 5/22/2020 4:16:23 PM(UTC)
Lansweeper Report on Assets in a Static Group
by  Andy.S   Go to last post Go to first unread
Last post: 5/22/2020 2:55:03 PM(UTC)
Lansweeper Windows 10 Activation
by  TruSynergy  
Go to last post Go to first unread
Last post: 5/21/2020 7:54:25 PM(UTC)
Lansweeper Filtering Report Based On Active Status
by  CyberCitizen   Go to last post Go to first unread
Last post: 5/21/2020 4:04:33 AM(UTC)
Lansweeper Windows: Unauthorized Administrators (Built-in)
by  Jackie.L  
Go to last post Go to first unread
Last post: 5/20/2020 8:01:17 PM(UTC)