Notification

Icon
Error

Uptime incorrect - Uptime showing incorrect against some assets

Posted: Friday, July 19, 2019 10:53:33 AM(UTC)
alfiet

alfiet

Member Original PosterPosts: 11
0
Like
Hi, I'd like to use the 'Assets: Uptime since last reboot' report to get a list of computers that haven't been rebooted recently so that i can target them for remote reboots to get Windows Updates installed etc.

However, the Uptime against some computers seems to be incorrect - for example there are some systems that are rebooted every day that are displaying as last rebooted a long time ago - the highest is 233 days. I've physically rebooted some of the computers myself and then rescanned them, and they still show up with the same uptime following the scan. There's nothing consistent with the computers having this problem. Around 2/3 of our assets seem to be OK, but 1/3 of them are showing uptimes that are wrong.

Please could anybody let me know if they have any ideas on this? We're running version 7.1.117.4

Thanks
CyberCitizen
#1CyberCitizen Member Posts: 266  
posted: 7/22/2019 1:29:08 AM(UTC)
Look at Windows 10 Fast Boot.

It puts the machine into a sleep hybrid mode etc, so the machine doesn't actually shut down, hence the reporting time is correct by Lansweeper.

On one of the machines.
Run "shutdown -r -f -t 0"

This will do a forced shutdown (restart) and you will see the time report connect when you re-scan the assets.

The fix is either remove the fast boot option, which we have done for Surface Tablets as they cause issues reguarly if not rebooted / shutdown.

Active Discussions

Lansweeper Report for Microsoft Win 7 Extended Support
by  RC62N   Go to last post Go to first unread
Last post: Yesterday at 6:46:53 PM(UTC)
Lansweeper How to make a colour coded report
by  B.Rutherford  
Go to last post Go to first unread
Last post: Yesterday at 4:27:06 PM(UTC)
Report Center All switches and the assets connected to them
by  NWSF   Go to last post Go to first unread
Last post: 12/12/2019 5:23:34 PM(UTC)
Lansweeper Report showing single asset type
by  RC62N  
Go to last post Go to first unread
Last post: 12/11/2019 10:02:41 PM(UTC)
Report Center .Net 4.5 through 4.8 report - Reg Key scanning based
by  Martin Schulz   Go to last post Go to first unread
Last post: 12/11/2019 11:55:24 AM(UTC)
Lansweeper Assets and Owner listing help
by  ssmarr5  
Go to last post Go to first unread
Last post: 12/10/2019 9:23:09 PM(UTC)
Lansweeper HPE SAS Solid State Drives failure report
by  Tommy75   Go to last post Go to first unread
Last post: 12/10/2019 8:04:05 AM(UTC)
Lansweeper Adding Owner/User information to Assets:All column report
by  ssmarr5  
Go to last post Go to first unread
Last post: 12/10/2019 12:15:01 AM(UTC)