Notification

Icon
Error

Windows CE - Scanning - Not scanning correctly Win CE devices

Posted: Friday, May 24, 2019 8:08:13 PM(UTC)
maupaiva

maupaiva

Member Original PosterPosts: 2
0
Like
Hey folks, good morning.
by chance there is any successful way to scan all our Windows CE devices?

All of them appeared as unknown, luckily as I have a separate vlan for these assets I was able to successfully run a mass edit but I would like to know if I can do this process more effective and less manual.

Thank you
Esben.D
#1Esben.D Member Administration Posts: 1,966  
posted: 5/27/2019 3:56:34 PM(UTC)
Windows CE does not support WMI, which is where most of the Windows data is scanned from. Best thing might be to close down the Windows identification ports ( https://www.lansweeper.c...edgebase/used-tcp-ports/ ) and scan it using SNMP.

Without WMI, you can only get limited data from the devices. Also it will not show as a Windows device by default as there is not way to identify it as one. Maybe you can map the OID: https://www.lansweeper.c...ets-asset-type/#heading2

Active Discussions

Installer Windows 10 Upgrade
by  CyberCitizen  
Go to last post Go to first unread
Last post: 12/2/2019 12:20:57 AM(UTC)
Installer Team Viewer Host update / install
by  BastiOn   Go to last post Go to first unread
Last post: 11/27/2019 2:09:10 PM(UTC)
Installer Office 2016 Update
by  Cem Serdar  
Go to last post Go to first unread
Last post: 11/7/2019 12:05:50 PM(UTC)
Installer Mozilla FireFox 70.0 Install
by  CyberCitizen   Go to last post Go to first unread
Last post: 11/7/2019 12:09:14 AM(UTC)
Installer Update Chrome browser with GoogleUpdate.exe ?
by  Mike Carey  
Go to last post Go to first unread
Last post: 11/6/2019 10:35:43 PM(UTC)
Installer CutePDF and Ghostscript install (Print to PDF)
by  Ruben1  
Go to last post Go to first unread
Last post: 10/15/2019 10:35:05 AM(UTC)