Notification

Icon
Error

Performance scanning - incorrect values

Posted: Tuesday, April 23, 2019 9:40:16 AM(UTC)
Borek

Borek

Member Original PosterPosts: 5
0
Like
Hi
Last week I've installed version 7 and set Performance scanning history to 7 days. Today I run your Top CPU report (top 50). All servers have >65% CPU which is not real. According to Lansweeper some servers have almost 100% CPU but in reality they have barely aby load.
Borek attached the following image(s):
cpu1.png
cpu2.png
cpu3.png
Esben.D
#1Esben.D Member Administration Posts: 1,982  
posted: 4/23/2019 1:42:11 PM(UTC)
I believe the issue is related to specific Windows OS. An issue where System Idle Process is incorrectly shown as CPU usage. It always helps to send these sort of thing to support@lansweeper.com so they can add any additional information to the bug report.
Borek
#2Borek Member Original PosterPosts: 5  
posted: 4/23/2019 2:15:07 PM(UTC)
OK, I will report a bug to support.
It seems to me that it is not related to a specific Windows version.
Esben.D
#3Esben.D Member Administration Posts: 1,982  
posted: 4/24/2019 1:04:57 PM(UTC)
As far as I've seen it's mainly Server OS.
Richard_Lan
#4Richard_Lan Member Posts: 6  
posted: 4/24/2019 4:26:02 PM(UTC)
I have this on my win 10 and win 7 boxes.

Active Discussions

Lansweeper Automated warranty check not working for HP
by  Erik.T   Go to last post Go to first unread
Last post: Today at 5:40:25 PM(UTC)
Lansweeper Guide: Get Every Asset MAC Addresses From Every Subnet
by  Erik.T  
Go to last post Go to first unread
Last post: Today at 5:38:15 PM(UTC)
Lansweeper Vcenter Scanning Credential
by  Erik.T   Go to last post Go to first unread
Last post: Today at 5:33:58 PM(UTC)
Lansweeper SCCM Integration
by  Erik.T  
Go to last post Go to first unread
Last post: Today at 5:29:26 PM(UTC)
Lansweeper SATA MODE REPORT
by  Erik.T   Go to last post Go to first unread
Last post: Today at 5:20:37 PM(UTC)
Lansweeper Scanning - computer manufacturer shows as VPN though
by  Erik.T  
Go to last post Go to first unread
Last post: Today at 5:14:34 PM(UTC)
Lansweeper Lastlogon / lastlogondate
by  Erik.T   Go to last post Go to first unread
Last post: Today at 5:13:16 PM(UTC)
Lansweeper SNMP and not in English
by  Erik.T  
Go to last post Go to first unread
Last post: Today at 5:01:56 PM(UTC)