Notification

Icon
Error

C2960X switch

Posted: Friday, September 14, 2018 11:01:15 AM(UTC)
Esben.D

Esben.D

Member Administration Original PosterPosts: 1,321
0
Like
Some extra OID's you can use for load measurement, memory usage and more

1 min CPU load average: 1.3.6.1.4.1.9.2.1.57.0 (5min is already in Lansweeper)
5 min memory used: 1.3.6.1.4.1.9.9.48.1.1.1.5.1
5 min memory free: 1.3.6.1.4.1.9.9.48.1.1.1.6.1

Load details: 1.3.6.1.4.1.351.140.1.2.13.1.1 (1.3.6.1.4.1.351.140.1.2.13.1.1.1 - 1.3.6.1.4.1.351.140.1.2.13.1.1.43)
These contain load numbers for verity of things on switch like interface bandwidth, bandwidth for CBR, VBR, ABR, UBR.

I was looking for temperature OIDs, but haven't found ones that work yet. Does anyone else have some?
Hendrik.VE
#1Hendrik.VE Member Administration Posts: 7  
posted: 9/18/2018 1:55:45 PM(UTC)
You can use 1.3.6.1.4.1.9.9.13.1.3.1.3.1008 to monitor the temperature.

Active Discussions

Lansweeper Lanier MP Printers
by  Esben.D   Go to last post Go to first unread
Last post: 1/28/2019 10:06:16 AM(UTC)
Lansweeper Ubiquiti Unifi OID and MIB files
by  crashff  
Go to last post Go to first unread
Last post: 9/24/2018 8:14:31 PM(UTC)
Lansweeper C2960X switch
by  Hendrik.VE   Go to last post Go to first unread
Last post: 9/18/2018 1:55:45 PM(UTC)
Lansweeper Getting started with custom OID scanning and sharing
by  Esben.D  
Go to last post Go to first unread
Last post: 8/23/2018 2:34:13 PM(UTC)