Notification

Icon
Error

Cisco IOS and IOS XE Software Smart Install Remote Code Execution Vulnerability

Posted: Friday, April 6, 2018 2:37:58 PM(UTC)
Esben.D

Esben.D

Member Administration Original PosterPosts: 1,982
2
Like
In light of the recent Cisco IOS and IOS XE Software Smart Install Remote Code Execution Vulnerability, we created a report which can be used to find possible vulnerable Cisco switches.

Cisco switches will in most cases have their software name and version in the description once scanned by Lansweeper. Based on the description, the report below will display all switches that have "IOS" or "IOS XE" software.
Code:
Select Distinct Top 1000000 tblAssets.AssetID,
  tblAssets.AssetName,
  tsysAssetTypes.AssetTypename,
  tblAssetCustom.Manufacturer,
  tblAssets.IPAddress,
  tblAssets.Mac,
  tblAssets.Description,
  tsysAssetTypes.AssetTypeIcon10 As icon,
  tblAssets.Lastseen,
  tblAssets.Lasttried
From tblAssets
  Inner Join tblAssetCustom On tblAssets.AssetID = tblAssetCustom.AssetID
  Inner Join tsysAssetTypes On tsysAssetTypes.AssetType = tblAssets.Assettype
  Inner Join tblSNMPInfo On tblAssets.AssetID = tblSNMPInfo.AssetID
Where (tblAssets.Description Like '%IOS%' Or tblAssets.Description Like
    '%IOS%XE%') And tblAssetCustom.State = 1
Order By tblAssets.AssetName

To use the report, do the following:
  1. Add the report to Lansweeper. Instructions can be found here.
  2. Find the software type (IOS or IOS XE) and version numbers of the switches in the report's "Description" column.
  3. Enter the version numbers in Cisco's software checker here: https://tools.cisco.com/...center/softwarechecker.x

    Cisco IOS Software Checker

  4. Click Continue twice and check if "Cisco IOS and IOS XE Software Smart Install Remote Code Execution Vulnerability" is in the list of affected security advisories.

    Security Advisories That Affect This Release
Esben.D
#1Esben.D Member Administration Original PosterPosts: 1,982  
posted: 4/6/2018 2:38:28 PM(UTC)
If you have any questions regarding the report, please contact us via email at support@lansweeper.com

Active Discussions

Lansweeper Automated warranty check not working for HP
by  Erik.T   Go to last post Go to first unread
Last post: Today at 5:40:25 PM(UTC)
Lansweeper Guide: Get Every Asset MAC Addresses From Every Subnet
by  Erik.T  
Go to last post Go to first unread
Last post: Today at 5:38:15 PM(UTC)
Lansweeper Vcenter Scanning Credential
by  Erik.T   Go to last post Go to first unread
Last post: Today at 5:33:58 PM(UTC)
Lansweeper SCCM Integration
by  Erik.T  
Go to last post Go to first unread
Last post: Today at 5:29:26 PM(UTC)
Lansweeper SATA MODE REPORT
by  Erik.T   Go to last post Go to first unread
Last post: Today at 5:20:37 PM(UTC)
Lansweeper Scanning - computer manufacturer shows as VPN though
by  Erik.T  
Go to last post Go to first unread
Last post: Today at 5:14:34 PM(UTC)
Lansweeper Lastlogon / lastlogondate
by  Erik.T   Go to last post Go to first unread
Last post: Today at 5:13:16 PM(UTC)
Lansweeper SNMP and not in English
by  Erik.T  
Go to last post Go to first unread
Last post: Today at 5:01:56 PM(UTC)