Notification

Icon
Error

Discover devices vulnerable to Intel SA-00086

Posted: Tuesday, December 5, 2017 1:46:37 PM(UTC)
Bruce.B

Bruce.B

Member Administration Original PosterPosts: 562
7
Like
DISCLAIMER: The Intel discovery tool has been known to hang on Virtual Machines. As a result running the package on a VM may cause it to hang and end up on a 'Package Timeout' error.

Intel has identified several security vulnerabilities in its Management Engine (ME), Trusted Execution Engine (TXE) and Server Platform Services (SPS) that could place impacted PCs, servers and IoT platforms at risk. Attackers could gain unauthorized access to systems using the Management Engine feature.
This topic outlines how you can deploy the Intel-SA-00086 discovery tool using the Lansweeper deployment module and afterwards run a report that lists whether your computers are vulnerable or not.
To make use of this guide make sure the following are in order:

If the requirements are in order, you can mass check whether your computers are vulnerable or not by doing the following 3 things, setting up custom registry scanning for the registry value created by the Intel tool, deploying the Intel tool and reporting on the results:

1) Set up Custom Registry Scanning for the registry key the Intel tool will create:
  • Go to Scanning\File & Registry Scanning
  • Click Add Registry Scan
  • Enter the following in the Regpath field: HKEY_LOCAL_MACHINE\SOFTWARE\Intel\Setup and Configuration Software\INTEL-SA-00086 Discovery Tool\System Status
  • Enter the following in the Regvalue field: System Risk

UserPostedImage

2) Go to Deployment\Security Options and set up your package share and share user.

3) Follow the instructions found in the Installer Center to add the deployment to your Lansweeper installation.


UserPostedImage


4) Follow the instructions found in the Report Center to add the report to your Lansweeper installation.


UserPostedImage

5) Patch your systems via the vendor resources listed in the Intel article found here.
Bruce.B
#1Bruce.B Member Administration Original PosterPosts: 562  
posted: 12/5/2017 2:20:41 PM(UTC)
If you have any feedback or questions regarding this topic, please contact us via support@lansweeper.com.

Active Discussions

Lansweeper Wake on Lan Issues
by  miharix   Go to last post Go to first unread
Last post: Today at 6:23:13 PM(UTC)
Lansweeper Export Ticket List
by  Yassine Dakir  
Go to last post Go to first unread
Last post: Today at 12:29:07 PM(UTC)
Lansweeper AWS scanning appears to only cover 1 account
by  Vincent Pollock   Go to last post Go to first unread
Last post: Yesterday at 9:26:04 PM(UTC)
Lansweeper TCP 445 to external IP during LS scan?
by  jvogler  
Go to last post Go to first unread
Last post: Yesterday at 8:02:06 PM(UTC)
Lansweeper Use Wildcard for User Name in Allowed Administrator
by  FP  
Go to last post Go to first unread
Last post: 2/22/2021 10:33:25 PM(UTC)
Lansweeper Helpdesk report for tickets for all on one reason
by  TimHolmes1973   Go to last post Go to first unread
Last post: 2/22/2021 7:22:56 PM(UTC)
Lansweeper Issues Updating
by  FrankSc  
Go to last post Go to first unread
Last post: 2/22/2021 11:06:50 AM(UTC)