Notification

Icon
Error

Scanning for specific application and services event log?

Posted: Monday, April 1, 2019 1:12:45 PM(UTC)
df1823

df1823

Member Original PosterPosts: 7
1
Like
Just wondering is there a way i can add a specific event log to be scanned on lansweeper so i can either create a report or it show up on the Recent eventlog entries on devices?

I am looking to gather into from a few different event logs (the location would be Event Viewer - Applications and Services logs - Microsoft - Windows - SMBserver - Audit or GroupPolicy - Operational)

Thanks
Esben.D
#1Esben.D Member Administration Posts: 1,982  
posted: 4/2/2019 8:40:05 AM(UTC)
First off, it's important to know that Lansweeper will only scan Windows logs from the Event Viewer. So make sure that the logs you want to scan are in there.

If they are, the second thing you need to verify is that the correct event log scanning is enabled. By default Lansweeper will only scan error type events (to prevent exponential DB growth). If you want to scan any other type of events, you can enable it in configuration\server options.

Once it's scanned you can use the report named "Windows: Error events generated in last 7 days" as an example and edit it. Just filter for the type and ID of the events you want to see.
df1823
#2df1823 Member Original PosterPosts: 7  
posted: 4/2/2019 9:27:10 AM(UTC)
Hi

When you say "Lansweeper will only scan Windows logs from the Event Viewer" would these logs be included as part of that?

If you open up Event Viewer - Applications and Services logs - Microsoft - Windows - SMBserver. I would say yes that is part of event viewer, but im guessing Lansweeper would just class the normal Application, Security, Setup and System logs?

The second thing if Lansweeper did scan the other event logs, you mentioned it can scan information events but obviously that would increase the DB size dramatically.

I think i will have to go back to to the drawing board to try and pull all of these events from another way
memxit
#3memxit Member Posts: 13  
posted: 2/19/2020 8:30:44 PM(UTC)
Scanning Application and Service logs is becoming a much needed feature for our company as new software is starting to use this location exclusively.

Ideally we would like to see the capability to scan for a specific Application/Service log within the Scanner settings and filter what types (warning etc.) are stored in the database.
rader
#4rader Member Posts: 10  
posted: 7/9/2020 10:37:34 PM(UTC)
I concur with memxit and df1823 about the need to scan the Applications and Services Logs group. I'm trying to pull Veeam errors and warnings, as well as informational events to put together a dashboard of backups that have failed, passed and machines that have the software installed on then.

Active Discussions

Installer Windows 10 Upgrade
by  CyberCitizen  
Go to last post Go to first unread
Last post: 7/8/2020 1:07:47 AM(UTC)
Installer Installer - Microsoft Office
by  Florian_Eigsi   Go to last post Go to first unread
Last post: 6/29/2020 3:33:20 PM(UTC)
Installer Firefox ESR 68.8.0 MSI Installer
by  PLSJohnJohn  
Go to last post Go to first unread
Last post: 5/11/2020 4:33:50 PM(UTC)
Installer Update Chrome browser with GoogleUpdate.exe ?
by  Inna Ptushkina   Go to last post Go to first unread
Last post: 5/4/2020 8:39:29 PM(UTC)
Installer Bios Update for Dell all in one
by  Florian_Eigsi  
Go to last post Go to first unread
Last post: 4/2/2020 11:36:43 AM(UTC)
Installer Uninstall - Adobe Acrobat 9x
by  palemmo   Go to last post Go to first unread
Last post: 3/25/2020 7:25:05 PM(UTC)
Installer OneDrive Silent Install
by  Steven.C  
Go to last post Go to first unread
Last post: 3/13/2020 2:55:19 PM(UTC)