Notification

Icon
Error

Issues with scanning - After upgrade we are having issues with lower numbers

Posted: Thursday, December 26, 2019 4:33:04 PM(UTC)
agibson95

agibson95

Member Original PosterPosts: 3
1
Like
We upgraded the server in November to the latest version (7.2.106.35). Once we did that, we scanned all of our subnets and noticed that we had less computers discovered than we had previously. Due to that our report numbers changed and we cannot connect to some machines that are on our network, despite manually adding their IP range to the queue.

We have verified that the ranges are correct and that the account used to scan the machines is active and that the password is correct.

Since we depend on Lansweeper for report numbers, I am trying to troubleshoot what the issues are. For example, if you look at a report that we have for Windows 7 machines, you will see that the machines say they are non-active and the lastseen is the date right before we upgraded the server. However, if you use remote control through Lansweeper, you can connect to these machines.

Adam
metasit
#1metasit Member Posts: 3  
posted: 1/13/2020 5:12:26 PM(UTC)

Active Discussions

Lansweeper Lansweeper Webserver Error
by  Bruce.B   Go to last post Go to first unread
Last post: Today at 3:19:01 AM(UTC)
Lansweeper LsAgent install issue
by  Susan.A  
Go to last post Go to first unread
Last post: Yesterday at 8:46:19 PM(UTC)
Lansweeper Is a Common Table Expression possible?
by  PatrickWolf   Go to last post Go to first unread
Last post: Yesterday at 6:52:24 PM(UTC)
Lansweeper Tracking assets like docking station, mouse and keyboards
by  cycleheat  
Go to last post Go to first unread
Last post: Yesterday at 5:00:39 PM(UTC)
Lansweeper Update to V. 7.2.107.4
by  cycleheat   Go to last post Go to first unread
Last post: Yesterday at 4:57:38 PM(UTC)
Lansweeper Windows Defender AV
by  Rob B  
Go to last post Go to first unread
Last post: Yesterday at 4:55:19 PM(UTC)
Lansweeper Scan Server Scanning wrong IP range
by  wayneRex   Go to last post Go to first unread
Last post: Yesterday at 3:49:36 PM(UTC)
Lansweeper Lansweeper support levels
by  RobertB  
Go to last post Go to first unread
Last post: 1/23/2020 10:39:05 PM(UTC)