Notification

Icon
Error

Pushing Packages in Multi-Domain Trusted Environment

Posted: Friday, July 19, 2019 5:43:05 PM(UTC)
SPedraza

SPedraza

Member Original PosterPosts: 5
0
Like
Hello,

We have a multi-domain trusted environment with 4 domains as shown below:

- Domain A (Workstations and Servers)
- Domain B (Workstations and Servers)
- Domain C (Servers)
- Domain D (Servers)

We have a LanSweeper service account created under each domain that is a domain admin in every workstation and server in each domain. When trying to push packages, I only get it to work with domain A but domain B fails even when using domain admin credentials for domain B account. The error I get is: "A specified logon session does not exist. It may already have been terminated." The account does exist and it is local admin in the machine and part of the domain. The equivalent account for domain A works on machines under domain A. Is there anything special to do in a multi-domain environment?

Thanks,
SPedraza attached the following image(s):
2019-07-19_11-39-35.jpg
CyberCitizen
#1CyberCitizen Member Posts: 266  
posted: 7/22/2019 1:26:44 AM(UTC)
We had a similar issue here, while the domains were trusted etc, we had issues with deployments over on the other domain.

We built the laptops here on Domain A, so it was only applications that were specific to Domain B that need to be deployed were kept on a file server on the same domain.

The main thing is credentials are the issues.

What I have currently set up now though is on our file server (package share - we use a different location vs Lansweeper Server), we have a local user account called lsscan which has full access to that package share location and then deploy using a domain admin account used for just Lansweeper.

Since that setup we haven't really had any issues with cross domain deployments.

Active Discussions

Lansweeper TPM scanning
by  gene@sca   Go to last post Go to first unread
Last post: Yesterday at 10:40:24 PM(UTC)
Lansweeper Bulk AssetLock set
by  tcooper  
Go to last post Go to first unread
Last post: Yesterday at 6:24:15 PM(UTC)
Lansweeper Set AssetType based on Model?
by  tcooper   Go to last post Go to first unread
Last post: Yesterday at 6:16:57 PM(UTC)
Lansweeper Public IP Address
by  David Goodwin  
Go to last post Go to first unread
Last post: Yesterday at 4:57:14 PM(UTC)
Lansweeper Exchange Scan in v7 and DAG
by  Peter.Riederer   Go to last post Go to first unread
Last post: Yesterday at 8:42:48 AM(UTC)
Lansweeper Asset Scanning - Change Types
by  DNuhija  
Go to last post Go to first unread
Last post: 12/12/2019 5:40:47 PM(UTC)
Lansweeper Plundervolt
by  NWSF   Go to last post Go to first unread
Last post: 12/12/2019 5:10:14 PM(UTC)
Lansweeper MSI Package
by  Stefano Magri  
Go to last post Go to first unread
Last post: 12/12/2019 3:34:16 PM(UTC)