Notification

Icon
Error

Report Library Feedback

Posted: Tuesday, July 2, 2019 2:10:55 PM(UTC)
Esben.D

Esben.D

Member Administration Original PosterPosts: 1,960
1
Like
We released our new Report Library as mentioned in the announcement post. Feel free to check it out or go straight to the new Report Library.

If you have any feedback on how we can improve the Report Library further, feel free to drop a comment below!
jwood.mls
#1jwood.mls Member Posts: 41  
posted: 7/3/2019 3:30:55 PM(UTC)
I really like the idea of having a report library. I do feel that the companion piece for this is that Lansweeper really has to have sub-sections for reports. What with all the great canned reports, then if you start adding your own, it can easily become overwhelming and make you less likely to use reports. I have 592 reports right now personally - it would be great if I could break those down into manageable categories in Lansweeper.

Thanks
Esben.D
#2Esben.D Member Administration Original PosterPosts: 1,960  
posted: 7/4/2019 8:07:39 AM(UTC)
Originally Posted by: jwood.mls Go to Quoted Post
I really like the idea of having a report library. I do feel that the companion piece for this is that Lansweeper really has to have sub-sections for reports. What with all the great canned reports, then if you start adding your own, it can easily become overwhelming and make you less likely to use reports. I have 592 reports right now personally - it would be great if I could break those down into manageable categories in Lansweeper.

Thanks


Even though it's not directly related to the report library on the website, I'll pass it along. Best thing to do I found is to prefix your reports.
jwood.mls
#3jwood.mls Member Posts: 41  
posted: 7/8/2019 3:01:21 PM(UTC)
Originally Posted by: Esben.D Go to Quoted Post


Even though it's not directly related to the report library on the website, I'll pass it along. Best thing to do I found is to prefix your reports.


We do use prefixes; however when you have 500+ reports and 10+ people using them, not everyone thinks of the same prefix. If it could be categorized easier in Lansweeper by only having to look at say 10-20 headings, then drill down, I think it would reduce the barriers to using reports. I love working with reports, but I think its daunting to some, and if they knew where to look better for examples, they'd jump in quicker. Clearly the report library will help with this, and I think categories in Lansweeper will as well.


Active Discussions

Lansweeper Report showing single asset type
by  Liamsy11   Go to last post Go to first unread
Last post: Today at 2:43:05 PM(UTC)
Report Center All switches and the assets connected to them
by  CoolDood  
Go to last post Go to first unread
Last post: Today at 12:15:53 PM(UTC)
Report Center .Net 4.5 through 4.8 report - Reg Key scanning based
by  Martin Schulz   Go to last post Go to first unread
Last post: Today at 11:55:24 AM(UTC)
Lansweeper Assets and Owner listing help
by  ssmarr5  
Go to last post Go to first unread
Last post: Yesterday at 9:23:09 PM(UTC)
Lansweeper HPE SAS Solid State Drives failure report
by  Tommy75   Go to last post Go to first unread
Last post: Yesterday at 8:04:05 AM(UTC)
Lansweeper Software Missing Report
by  RC62N  
Go to last post Go to first unread
Last post: 12/6/2019 6:09:28 PM(UTC)
Lansweeper Assets without Asset Location
by  JLangthaler   Go to last post Go to first unread
Last post: 12/5/2019 12:44:19 PM(UTC)
Lansweeper Installed Memory report
by  lansend  
Go to last post Go to first unread
Last post: 12/2/2019 8:15:53 PM(UTC)