Notification

Icon
Error
12>
Harryc
#0Harryc Member Posts: 1  
posted: 5/18/2017 5:40:47 AM(UTC)
Originally Posted by: Susan.A Go to Quoted Post
The report below lists Windows computers that are missing a specific hotfix (Windows update). Replace YourHotfix with the hotfix ID you would like to report on, e.g. KB2079403.

The report will only list assets that meet all of the following criteria:
  • The asset is a Windows computer.
  • The computer's state is set to "active".
  • The computer has been successfully scanned at least once.
  • The computer does not have the specified hotfix/update installed.

Code:
Select Top 1000000 tsysOS.Image As icon,
  tblAssets.AssetID,
  tblAssets.AssetName,
  tblAssets.Domain,
  tblAssets.Username,
  tblAssets.Userdomain,
  tblAssets.IPAddress,
  tblAssets.Firstseen,
  tblAssets.Lastseen,
  tblAssets.Lasttried
From tblAssets
  Inner Join tblAssetCustom On tblAssets.AssetID = tblAssetCustom.AssetID
  Inner Join tsysOS On tsysOS.OScode = tblAssets.OScode
Where tblAssets.AssetID Not In (Select Top 1000000 tblQuickFixEngineering.AssetID
From tblQuickFixEngineering
  Inner Join tblQuickFixEngineeringUni On tblQuickFixEngineeringUni.QFEID =
    tblQuickFixEngineering.QFEID
Where tblQuickFixEngineeringUni.HotFixID Like '%[h]YourHotfix[/h]%') And
  tblAssetCustom.State = 1
Order By tblAssets.Domain,
  tblAssets.AssetName



Thanks for your information. I have a question, so is this scan only trigger by active scan? Can lspush agent also collect these windows patch information if we don't have Windows active scanning?
0
Bruce.B
#1Bruce.B Member Administration Posts: 550  
posted: 5/18/2017 9:52:21 AM(UTC)
Originally Posted by: Harryc Go to Quoted Post
Originally Posted by: Susan.A Go to Quoted Post
The report below lists Windows computers that are missing a specific hotfix (Windows update). Replace YourHotfix with the hotfix ID you would like to report on, e.g. KB2079403.

The report will only list assets that meet all of the following criteria:
  • The asset is a Windows computer.
  • The computer's state is set to "active".
  • The computer has been successfully scanned at least once.
  • The computer does not have the specified hotfix/update installed.

Code:
Select Top 1000000 tsysOS.Image As icon,
  tblAssets.AssetID,
  tblAssets.AssetName,
  tblAssets.Domain,
  tblAssets.Username,
  tblAssets.Userdomain,
  tblAssets.IPAddress,
  tblAssets.Firstseen,
  tblAssets.Lastseen,
  tblAssets.Lasttried
From tblAssets
  Inner Join tblAssetCustom On tblAssets.AssetID = tblAssetCustom.AssetID
  Inner Join tsysOS On tsysOS.OScode = tblAssets.OScode
Where tblAssets.AssetID Not In (Select Top 1000000 tblQuickFixEngineering.AssetID
From tblQuickFixEngineering
  Inner Join tblQuickFixEngineeringUni On tblQuickFixEngineeringUni.QFEID =
    tblQuickFixEngineering.QFEID
Where tblQuickFixEngineeringUni.HotFixID Like '%[h]YourHotfix[/h]%') And
  tblAssetCustom.State = 1
Order By tblAssets.Domain,
  tblAssets.AssetName



Thanks for your information. I have a question, so is this scan only trigger by active scan? Can lspush agent also collect these windows patch information if we don't have Windows active scanning?


Windows updates are scanned by any form of Windows computer scanning, be it IP Range scanning, Active (Directory Domain) Scanning, Windows Computer Path scanning or LsPush scanning. Do note though that the item that covers these Windows updates, 'Quickfix' has a scanning interval of 7 days. This can be adjusted under Scanning\Scanned Item Interval.
0
Stephen Ellis
#2Stephen Ellis Member Posts: 1  
posted: 6/12/2018 8:53:42 AM(UTC)
Hi All,

How do i swap from searching to match all missing patches to any?

at the moment i have;

Select Top 1000000 tsysOS.Image As icon,
tblAssets.AssetID,
tblAssets.AssetName,
tblAssets.Domain,
tblAssets.Username,
tblAssets.Userdomain,
tblAssets.IPAddress,
tblOperatingsystem.Caption,
tblOperatingsystem.Version
From tblAssets
Inner Join tblAssetCustom On tblAssets.AssetID = tblAssetCustom.AssetID
Inner Join tsysOS On tsysOS.OScode = tblAssets.OScode
Inner Join tblOperatingsystem
On tblAssets.AssetID = tblOperatingsystem.AssetID
Where
tblAssets.AssetID Not In (Select Top 1000000 tblQuickFixEngineering.AssetID
From tblQuickFixEngineering Inner Join tblQuickFixEngineeringUni
On tblQuickFixEngineeringUni.QFEID = tblQuickFixEngineering.QFEID
Where tblQuickFixEngineeringUni.HotFixID In ('KB4103716', 'KB4103731',
'KB4074596', 'KB4093111', 'KB4074590', 'KB4093119', 'KB4103723',
'KB4074590')) And tblOperatingsystem.Version = '10.0.14393' And
tsysOS.OSname = 'Win 10' And tblAssetCustom.State = 1
Order By tblAssets.Domain,
tblAssets.AssetName
0
Argon0
#3Argon0 Member Posts: 43  
posted: 3/15/2019 11:30:25 AM(UTC)
OK, so... I'm confused, I want to see if a Specific KB has NOT been installed, or superseded by a newer patch... How do I do this?

Originally Posted by: Nick.VDB Go to Quoted Post
The report below will give back the machines that do not have the hotfixes installed. We have updated it with a list of the different hotfixes needed to mitigate MS17-010. These hotfixes are scanned from the Win32_QuickFixEngineering WMI class. There is an interval of 7 days for scanning the Win32_QuickFixEngineering WMI class, this can be modified by going to Scanning\Scanned Item Interval and setting it to 0. You can then do a full rescan of your machines so that the quickfixengineering table is updated with any new updates. Once the rescans have been done you can then run this report. In the report it is also required that the assets be set to the 'Active' state. If

Recap:
  • Go to Scanning\Scanned Item Interval
  • Change the interval time for the 'QUICKFIX' item to 0
  • Rescan all your assets to update the quickfixengineering tables with the new updates
  • Run the report

The hotfix must be found in Win32_QuickFixEngineering for Lansweeper to be able to scan it. The following command lists all the Hotfixes that are found in the Win32_QuickFixEngineering table.

wmic path Win32_QuickFixEngineering

Code:
Select Top 1000000 tsysOS.Image As icon,
  tblAssets.AssetID,
  tblAssets.AssetName,
  tblAssets.Domain,
  tblAssets.Username,
  tblAssets.Userdomain,
  tblAssets.IPAddress,
  tblAssets.Firstseen,
  tblAssets.Lastseen,
  tblAssets.Lasttried
From tblAssets
  Inner Join tblAssetCustom On tblAssets.AssetID = tblAssetCustom.AssetID
  Inner Join tsysOS On tsysOS.OScode = tblAssets.OScode
Where
  tblAssets.AssetID Not In (Select Top 1000000 tblQuickFixEngineering.AssetID
  From tblQuickFixEngineering Inner Join tblQuickFixEngineeringUni
      On tblQuickFixEngineeringUni.QFEID = tblQuickFixEngineering.QFEID
  Where tblQuickFixEngineeringUni.HotFixID In ('KB4012216','KB4012215',
    'KB4012217','KB4012212','KB4012204','KB4012213', 'KB4015551', 'KB4019216', 
'KB4015550', 'KB4019215', 'KB4013429', 'KB4019472', 'KB4015217', 'KB4015438', 'KB4016635', 'KB4012598')) And
  tblAssetCustom.State = 1
Order By tblAssets.Domain,
  tblAssets.AssetName


0
12>

Active Discussions

Lansweeper "add cc user" doesn't show the correct listings
by  JLPingree   Go to last post Go to first unread
Last post: Yesterday at 8:12:44 PM(UTC)
Lansweeper What exactly is Software: Changes in the last 24 hours reporting on?
by  Brandon   Go to last post Go to first unread
Last post: Yesterday at 7:43:01 PM(UTC)
Lansweeper All USB devices connected
by  RC62N   Go to last post Go to first unread
Last post: Yesterday at 6:40:58 PM(UTC)
Lansweeper Default User Date Format
by  RickW99456   Go to last post Go to first unread
Last post: Yesterday at 5:00:51 PM(UTC)
Lansweeper Duplicate assets (Servers)
by  FrankSc   Go to last post Go to first unread
Last post: Yesterday at 3:20:28 PM(UTC)
Lansweeper Lansweeper load the disk subsystem
by  Alexey Gorbachev   Go to last post Go to first unread
Last post: Yesterday at 3:13:17 PM(UTC)
Lansweeper Lost Configuration tab (Admin rights)
by  kspap   Go to last post Go to first unread
Last post: Yesterday at 10:30:12 AM(UTC)
Lansweeper Deployment with different user rights
by  Jupiter_IT   Go to last post Go to first unread
Last post: Yesterday at 9:39:20 AM(UTC)