Notification

Icon
Error

Installer - Firefox 62.0.3

Posted: Friday, October 5, 2018 12:20:54 PM(UTC)
Esben.D

Esben.D

Member Administration Original PosterPosts: 1,977
2
Like
This deployment package can be used to silently install or update Mozilla Firefox. You can use this report to find all assets which do not have version 62.0.3.

To ensure you can use this package, you must meet the following requirements:
To deploy the package, do the following:
  • Download the required Firefox installers.
  • Put the installer in the following directory: Program Files (x86)\Lansweeper\PackageShare\Installers. Add "_32" behind the 32bit installer file if you are using it.
If you are using the Firefox Extended Support Release (ESR) version, you can find a report for these versions here.
You can download the latest ESR version here.
Installer - Firefox 62.0.3Download Package
Description1. Download the required firefox installers from https://www.mozilla.org/nl/firefox/all/
2. Put the installer in the following directory: Program Files (x86)\Lansweeper\PackageShare\Installers. Add "_32" behind the 32bit installer file if you are using it.
Final ActionNothing
Max. Duration15 min(s), 0 hour(s)
RescanYes
Steps
1. Check OS
TypeCondition
SuccessGo To Step 3
FailureGo To Step 2
Conditions
OS Architecture Is 32 Bit
2. Check for installer x64
TypeCondition
SuccessGo To Step 4
FailureStop (Failure)
Conditions
File {PackageShare}\Installers Firefox Setup 62.0.3.exe Exists
3. Check for installer x86
TypeCondition
SuccessGo To Step 5
FailureStop (Failure)
Conditions
File {PackageShare}\Installers Firefox Setup 62.0.3_32.exe Exists
4. Install x64 Firefox
TypeInstaller
Return Codes 0,1641,3010
SuccessStop (Success)
FailureStop (Failure)
Command "{PackageShare}\Installers\Firefox Setup 62.0.3.exe" -ms
5. Install x86 Firefox
TypeInstaller
Return Codes 0,1641,3010
SuccessStop (Success)
FailureStop (Failure)
Command "{PackageShare}\Installers\Firefox Setup 62.0.3_32.exe" -ms
samirq
#1samirq Member Posts: 1  
posted: 10/6/2018 11:35:57 AM(UTC)
Hi there,

I think you need to adjust the steps a little, as there might be 64x OS version that has 32bit installation of Firefox.
so Step 2 should go to "step 3" in Failed condition instead of just "Stop".
Esben.D
#2Esben.D Member Administration Original PosterPosts: 1,977  
posted: 10/11/2018 9:04:28 AM(UTC)
While it is possible, the package is meant for a wide audience, so making the package install a 32bit Firefox when the 64bit installer file is not found could cause accidental installations.

If you are running 32bit Firefox on all devices, it's best to just slightly modify the package conditions.
kjohnson
#3kjohnson Member Posts: 5  
posted: 10/11/2018 8:51:53 PM(UTC)
It seems that I cannot get this installer to deploy. The package exists on the DefaultPackageShare$, however, I keep getting the error message that Result: Deployment ended: The system cannot find the file specified. Stop(Failure). Credential: (.\localacct). ShareCredential: (domainacct). I've verified that the file is there and even set both domain users and domain computers to have read & execute access to the drive. I can run the command logging into the sharedcredential as the domain user. I tried logging in as a regular user and running the command from command prompt but sometimes it installs and other times I'm hit with UAC prompting for admin credentials. What can I adjust to get this working?

Active Discussions

Lansweeper Changes in the licensing model
by  mcbeathb   Go to last post Go to first unread
Last post: Today at 6:47:51 AM(UTC)
Lansweeper About Memory Changes
by  fjca  
Go to last post Go to first unread
Last post: Yesterday at 5:51:17 PM(UTC)
Lansweeper Wildcard in file scanning to get all files in a directory?
by  RKCar   Go to last post Go to first unread
Last post: Yesterday at 4:03:43 PM(UTC)
Lansweeper Wishlist is dead, no responses from LS staff.
by  RobertB  
Go to last post Go to first unread
Last post: Yesterday at 3:08:12 PM(UTC)
Lansweeper Deploy installer packages not working any more
by  richv   Go to last post Go to first unread
Last post: Yesterday at 3:06:19 PM(UTC)
Lansweeper File Scanning
by  RKCar  
Go to last post Go to first unread
Last post: Yesterday at 2:22:54 PM(UTC)
Lansweeper HP Warranty scan - broken for some products
by  zaty   Go to last post Go to first unread
Last post: Yesterday at 1:52:38 PM(UTC)
Lansweeper How to stop deployments ?
by  Leandro Martins  
Go to last post Go to first unread
Last post: Yesterday at 1:47:22 PM(UTC)